Differences

This shows you the differences between two versions of the page.

--- nagios:nrpe.cfg [2015/06/23 12:52] – jzaehrin
+++ nagios:nrpe.cfg [2015/07/14 08:28] (current) – jzaehrin
@@ Line 1: / Line 1: @@
+/etc/nagios/nrpe.cfg
 <code>
 #############################################################################
@@ Line 96: / Line 97: @@
 # Values: 0=do not allow arguments, 1=allow command arguments
-dont_blame_nrpe=0
+dont_blame_nrpe=1
@@ Line 126: / Line 127: @@
 # Values: 0=debugging off, 1=debugging on
-debug=1
+debug=0
@@ Line 174: / Line 175: @@
 #include_dir=<somedirectory>
-#include_dir=<someotherdirectory>
@@ Line 197: / Line 197: @@
 # examples only!
-# The following examples use hardcoded command arguments...
-command[check_users]=/usr/lib/nagios/plugins/check_users -w 0 -c 0
-command[check_load]=/usr/lib/nagios/plugins/check_load -w 60,40,20 -c 80,60,40
-command[check_root]=/usr/lib/nagios/plugins/check_disk -w 30% -c 20% -p /
-command[check_monit]=/usr/lib/nagios/plugins/check_procs -C monit -c 1min:
-command[check_watchdog]=/usr/lib/nagios/plugins/check_procs -C watchdog -c 1min:
-command[check_acdsn]=/usr/lib/nagios/plugins/check_procs -C acdsn -c 1min:
-command[check_time]=/usr/lib/nagios/plugins/check_ntp_time -H ntp.metas.ch
-command[eh_time_full]=/home/acdsn/git/acdsn-scripts/set_time.sh -b >/dev/null 2>&1 && /home/acdsn/git/acdsn-scripts/broadcast_time.sh -b >/dev/null 2>&1
-command[eh_time_part]=/bin/bash /home/acdsn/git/acdsn-scripts/set_time.sh -a $ARG1$
 # local configuration:
@@ Line 219: / Line 206: @@
 # only snipplets ending in .cfg will get included
 include_dir=/etc/nagios/nrpe.d/
+</code>
+/etc/nagios/nrpe.d/commands.cfg
+<code>
+command[check_users]=/usr/lib/nagios/plugins/check_users -w 0 -c 0
+command[check_load]=/usr/lib/nagios/plugins/check_load -w 60,40,20 -c 80,60,40
+command[check_root]=/usr/lib/nagios/plugins/check_disk -w 30% -c 20% -p /
+command[check_monit]=/usr/lib/nagios/plugins/check_procs -C monit -c 1min:
+command[check_watchdog]=/usr/lib/nagios/plugins/check_procs -C watchdog -c 1min:
+command[check_acdsn]=/usr/lib/nagios/plugins/check_procs -C acdsn -c 1min:
+command[check_time]=/usr/lib/nagios/plugins/check_ntp_time -H 0.debian.pool.ntp.org -t 30
+command[eh_time_full]=sudo /home/acdsn/git/acdsn-scripts/set_time.sh
+command[eh_time_part]=/bin/bash /home/acdsn/git/acdsn-scripts/broadcast_time.sh -a $ARG1$
 </code>