acdsn:acdsn-a-fx
Table of Contents
ACDSN-AC-FX
The following line shows how to address and communicate with a NiX1 slave over a RS485 line.
2700000000000000Qw3 ^ ^^^ | ||| | ||- option | |-- argument | --- command ---- address
Addresses
| Label | Address | Comment |
|---|---|---|
| scratch | 270000000000005C | This is the scratch address used to configure new slave |
| broadcast | 27FFFFFFFFFFFF4E | This is the broadcast address |
Commands
Arguments
Delete
| Label | Arguments | Options | Comments |
|---|---|---|---|
| format | a | ||
| delete file | g | <filename> | |
| delete cron | h | ||
| delete key | k | if option set to 0, delete file | |
| delete right | r | <user>\t<unit> | if option set to 0, delete file |
| restart | s | ||
| delete unit | u | if option set to 0, delete file | |
| delete user | x | if option set to 0, delete file | |
| delete tmp files | y | delete file for Newfile fct | |
New
| Label | Arguments | Options | Comments |
|---|---|---|---|
| new bad access timeout | b | <timeout> | |
| new valid access timeout | c | <timeout> | |
| new entry | e | <comptability> | count number of lines in ACCESS file, update log_position and set compatibility |
| new file | g | <filename>\t<CRC> | |
| new cron | h | <cron> | |
| copy file | i | <filename>/t<copyFilename> | |
| new key | k | <timestamp>\t<key> | |
| new lock | l | <1|2>\t<lock> | locked (1) or not (0) |
| new mode | m | <mode> | NiX1 enable/disable |
| new firmware version | n | <filename>\t<retry times> | |
| new cron mode | o | <cron mode> | |
| new rights | r | <user>\t<unit>\t<right> | |
| new general status | s | <value> | set value in NiX general status |
| new timestamp | t | <timestamp>\t<TZ> | only if RTC defined (used to synchronize clock)(date +%s) |
| new unit | u | <1|2>\t<unit> | |
| new overdrive speed | v | <1|2>\t<overdrive> | put 1-wire devices in overdrive speed |
| new user | x | <uid>\t<timestamp>\t<inc> | timestamp of the last entry, and the key increment |
| new file packet | y | <nbrPacket>/t<blockLength>/t<CRC>/t<block> | |
| new baudrate | z | <baudrate> | |
Query
| Label | Arguments | Options | Comments |
|---|---|---|---|
| query bad access timeout | b | ||
| query valid access timeout | c | ||
| query entry | e | Receive: <address> \t <uid> \t <unit> \t <key_timestamp> \t <timestamp> \t <timezone> \t <iop> \t <overdrive_speed> \t <status> | |
| query file | g | <filename>\t<limit> | |
| query cron | h | ||
| query extension | i | <extension> | give a list of files with the extension desired (TXT,1, …) |
| query secret key | k | ||
| query lock | l | <1|2> | |
| query mode | m | slave/device active or not | |
| query firmware version | n | ||
| query Cron Mode | o | ||
| query Checksum | p | <filename> | |
| query rights | r | <uid>\t<unit> | |
| query general status | s | ||
| query timestamp | t | only if RTC is defined | |
| query unit | u | <1|2> | |
| query overdrive speed | v | ||
| query user | x | <uid> |
Options
| Options | Comments |
|---|---|
| <block> | block content (each char is formatted in 2 ascii in hexa value) ⇒ 'a' = 0x61 ⇒ sent : “61” |
| <blockLength> | length of the actual block in bytes |
| <comptability> | 0 to 65534 How many access we would like receive |
| <CRC> | 16 bits value |
| <cron> | * * * * * |
| <cron mode> | 0 to 3 |
| <filename> | File on uSD: CONFIG.TXT, KEYS.TXT … |
| <inc> | Key increment 0 to 99 |
| <limit> | Max line to display [0=all lines] |
| <mode> | 0 [disable] or 1 [enable] |
| <nbrPacket> | packet total number for a file |
| <overdrive> | 0 [disable] or 1 [enable] |
| <recess> | 0 to 180 [seconds] |
| <timeout> | 0 to 255 |
| <timestamp> | 0 to 9'999'999'999 [seconds since 1.1.1970] |
| <TZ> | -1200 to +1400 |
| <uid> | |
| <unit> | 0 to 65534 |
CRON MODE
0) Do not use slave cron, DEFAULT
1) within the cron valid date, the door stay open
2) within the cron valid date, use key to unlock the door and then follow the cron date to close it
3) within the cron valid date, use key to unlock and lock the door
Return Code (HEX)
| Code | Transmission | Functions |
|---|---|---|
| 00 | OK | |
| 04 | EOT | |
| 06 | ACK | |
| 15 | NAK | |
| 16 | SYN | |
| 21 | ERROR_ADDRESS | |
| 41 | ERROR_ARG | |
| 42 | ERROR_BUS | |
| 43 | ERROR_CMD | ERROR_CREDENTIAL |
| 44 | ERROR_DATA (iC) | |
| 46 | ERROR_FLASH | |
| 47 | ERROR_CRC | |
| 48 | ERROR_HASH | |
| 49 | ERROR_IB | |
| 4B | ERROR_KEY | |
| 4C | ERROR_LOG | |
| 4D | ERROR_MALLOC | |
| 4E | ERROR_NOT_FOUND | |
| 4F | ERROR_OFFSET | |
| 50 | ERROR_PARAM | |
| 51 | ERROR_QUANTITY | |
| 52 | ERROR_RXDATA | |
| 53 | ERROR_STOPPED_MISSION (iC) | |
| 54 | ERROR_TYPE | |
| 55 | ERROR_USER | |
| 57 | ERROR_WRITE | |
| 58 | ERROR_X | |
| 60 | ERROR_SYNTAX (used by/or no cron) | |
| 61 | ERROR_DAY_OF_YEAR | |
| 63 | ERROR_COPY | |
| 64 | ERROR_NOBROADCAST | |
| 65 | ERROR_EMPTY_MISSION (iC) | |
| 6C | ERROR_LOCK | |
| 72 | ERROR_RESOLUTION (sC) | |
| 73 | ERROR_SCHEDULE | |
| 76 | ERROR_UNIT | |
| 74 | ERROR_TIMESTAMP | |
| 7B | ERROR_SDCARDNOTFOUND | |
| FF | ERROR_INT |
Configuration Files (Server)
The configuration files are flat text file where each fields are separated by a tabulation.
keys.txt
Contains the list of the key used to hash the credentials on the iButton key. You can generate a new key every day and add it to this file, the most recent key comming first.
| Field Name | Description | Example |
|---|---|---|
| timestamp | The timestamp of the time when the key has been generated | 1350028169 |
| key | The value of the secret key | [Z}4V;qr$(/Kc_aiF7#K8tATNC |
- demo_keys.txt
1350028169 [Z}4V;qr$(/Kc_aiF7#K8tATNC 1349094539 IdRPKslg\?/ 1349085044 9YxUJ`wa#\U;M18=L,>_bo8wIbn"IoY 1349085044 cl8b]It3f,F-b 1349085044 ad15lMR{*]P_<koY&=@;cNgr
units.txt
Provides a link beetween the unit id and a human readable label.
| Field Name | Description | Example |
|---|---|---|
| id | The unique identifier of the unit, as used in slaves.conf | 2 |
| label | A human description of the unit | Main Office |
- demo_units.txt
1 Reception 2 Main Office 3 CEO's Office
users.txt
Contains the list of all users, the timestamp of the last key read from the user and a value which can be incremented when an iButton key is lost or if the data on the iButton key has been copied by some nasty people.
| Field Name | Description | Example |
|---|---|---|
| id | The unique identifier the the user, as used in cron.txt | Arthur Dent |
| timestamp | The timestamp of the last key read for the user | 1350028169 |
| increment | A value which can be incremented when an iButton key is lost | 3 |
- demo_users.txt
Arthur Dent 1350028169 3 Ford Prefect 1349085044 2 Zaphod Beeblebrox 1349085044 5
cron.txt
Contains the rights to access on some unit for a user during a specified time interval (specified as a cron).
| Field Name | Description | Example |
|---|---|---|
| unit_id | The number identifying the target unit of this rule | 1 |
| user_id | The identifier of the user on which this rule applies | Arthur Dent |
| cron | The cron value of the accessible periods for this rule | 0 8-17 * * * |
- demo_cron.txt
1 Arthur Dent 0 8-17 * * * 2 Arthur Dent 0 8-17 * * * 1 Ford Prefect * * * * *
CRON: * * * * * - - - - - | | | | | | | | | +----- day of week (0 - 6) (Sunday=0) | | | +------- month (1 - 12) | | +--------- day of month (1 - 31) | +----------- hour (0 - 23) +------------- min (0 - 59)
Configuration Files (Micro-SD)
These files can be found on the Micro-SD of a NiX.
#U.*
The # must be replaced by the humber of the unit. This file contains the rights to access on unit # for a user during a specified time interval (specified as a cron). (* Is the first letter of the uid)
| Field Name | Description | Example |
|---|---|---|
| uid | The identity of the user | Arthur Dent |
| cron | The cron value of the accessible periods for this unit | 0 8-17 * * * |
- 14U.U
user1 * * * * * user2 * 7-19 * 1-8 1,4-5 user3 * * * * * user4 * * * * *
- 15U.Y
YCPuvyf * * * * * yScigNLowCBf * * * * *
CRON: * * * * * - - - - - | | | | | | | | | +----- day of week (0 - 6) (Sunday=0) | | | +------- month (1 - 12) | | +--------- day of month (1 - 31) | +----------- hour (0 - 23) +------------- min (0 - 59)
ACCESS.#
This file contains important iButtons discharge logs. (# is the extension of day of year)
| Field Name | Description | Example |
|---|---|---|
| slave address | SID of NiX | 271A2100000000F3 |
| uid | The identity of the user | Arthur Dent |
| unit | Unit identification | 15 |
| daily key timestamp | The timestamp of daily key [0-1] | 1400191201 |
| timestamp | The timestamp of the NiX | 1400620011 |
| timezone | Code of the timezone | +0100 |
| probe | On which probe was the interruption | 1 or 2 |
| overdrive speed | Communication speed | 0 or 1 |
| error code | Error code in hex format | 39 |
- ACCESS.#
271A2100000000F3 user1 15 1436413339 +0100 2 0 55 271A2100000000F3 user2 15 1436413340 +0100 2 0 55 271A2100000000F3 user1 9 1436413341 +0100 1 0 55 271A2100000000F3 user1 15 1436413345 +0100 2 0 55
ACTIVITY.#
This file contains not important iButtons discharge logs. (# is the extension of day of year)
First line:
| Field Name | Description | Example |
|---|---|---|
| timestamp | The timestamp of the time when the NiX start | 1400578529 |
| slave address | SID of NiX | 271A2100000000F3 |
| general status | Last general status of NiX before the start (in hex format) | 00 |
After:
| Field Name | Description | Example |
|---|---|---|
| slave address | SID of NiX | 271A2100000000F3 |
| uid | The identity of the user [0-1] | Arthur Dent |
| unit | Unit identification | 15 |
| daily key timestamp | The timestamp of daily key [0-1] | 1400191201 |
| timestamp | The timestamp of the NiX | 1400620011 |
| timezone | Code of the timezone | +0100 |
| probe | On which probe was the interruption | 1 or 2 |
| overdrive speed | Communication speed | 0 or 1 |
| error code | Error code in hex format | 39 |
- ACTIVITY.#
1436413328 Slave ID: 271A2100000000F3 General status: 00 271A2100000000F3 15 1436413338 +0100 2 0 49 271A2100000000F3 9 1436413339 +0100 1 0 49
CONFIG.TXT
This file contains the minimal configuration with which the NiX cans run autonomously.
- CONFIG.TXT
BAD_ACCESS_TIMEOUT 5 BAUDRATE 9600 CRON * 7-18 * * 1-5 ENABLE 1 LOCK_0 0 LOCK_1 0 OD_SPEED_0 1 OD_SPEED_1 1 STANDALONE 0 TIMEZONE +0100 UNIT_0 14 UNIT_1 15 VALID_ACCESS_TIMEOUT 5
Mode: 0:INACTIVE, 1:NORMAL, 2:MOBILE 3:STANDALONE,
KEYS.TXT
This file contains the list of the key used by the NiX.
| Field Name | Description | Example |
|---|---|---|
| timestamp | The timestamp of the time when the key has been generated | 1400191201 |
| key | The value of the secret key | w`y]G+qmh{pNimx-0a,z#&.<%n |
- KEYS.TXT
1400191201 w`y]G+qmh{pNimx-0a,z#&.<%n 1400104801 xsL89*P&bn&I 1400018401 ?u=QyySu) 1399932001 nD]XbDMfQ<TU6Pq 1399845601 hdUaP(W3"Jy!=i}ch1#h&yEw 1399759201 E5fZaw7"ihn#w!cDNL[fh6k 1399672801 W^HF#"4X7@O+uj1`I6`~&^' 1399586401 Wfb+@o^emSbfYt4J-x$eJ,PS 1399500001 MKSKVB7E7wBfDviD!IsV@uZ 1399413601 "cgBzm17'1iN7NrmkO&1"KcN4? 1399327201 ~#9g$Z{{5\ 1399240801 Ya,BY\NudPH"#WL#} 1399154401 _9/)bvW@L4)IP~ 1399068001 7FZCB@.x_cY;^j!4! 1399047515 wt=U+$z&F=E}\$dLgA 1398981603 tOj|(mDpn`5Z!WS8r]V{Dkk|) 1398981602 tOj|(mDpn`5Z!WS8r]V{Dkk|)6q=NW<A 1398981601 o~ciZ<CwuB)8:VRlBHX%*C 1398895201 tOj|(mDpn`5Z!WS8r]V{Dkk|)6q=NW<C
USERS.*
(* Is the first letter of uid.)
| Field Name | Description | Example |
|---|---|---|
| uid | The identity of the user | Arthur Dent |
| timestamp | The timestamp of the last key read for the user | 1350028169 |
| increment | A value which can be incremented when an iButton key is lost | 3 |
- USERS.Y
YCPuvyf 772697 91 yScigNLowCBf 5081 38
acdsn/acdsn-a-fx.txt · Last modified: 2019/06/13 14:05 by sbolay