Action disabled: source
acdsn:acdsn-a-sd
Table of Contents
ACDSN-A-SD
Scope of delivery
Position | Quantity | Description |
---|---|---|
A | 1 | NiX1-MB card assembled with a NiX1-PWRCON card |
B | 1 | Installation manual |
C | 1 | 120 Ohm resistor |
Product Description
Position | Description |
---|---|
A |
Type Label
Position | Description | Explanation |
---|---|---|
A |
Symbol on the Type Label
Symbol | Description | Explanation |
---|---|---|
CE marking | The NiX1 Module complies with the requirements of the applicable EC directives. |
Connection
Device Overview
Position | Description |
---|---|
A |
Connecting the NiX1 Module
To achieve a good signal quality, observe the cable recommendation
Disturbance of Data Transmission due to AC Cables
During operation, AC cables generate an electromagnetic fiel which may induce interference in plant communication.
- Lay the RS485 communication cables using suitable fastening material and with a minimum clearance of 50mm to the AC cables.
The SD card content
acdsn/acdsn-a-sd.txt · Last modified: 2013/09/30 13:34 by sbolay