operating_systems:linux:debian:acdsn-ac-fx
This is an old revision of the document!
ACDSN-AC-FX
The following line shows how to address and communicate with a NiX1 slave over a RS485 line.
1Qw3 ^^^^ |||| |||- option ||-- argument |--- command ---- address
Commands
Arguments
Delete
Label | Arguments | Options | Comments |
---|---|---|---|
format | a | ||
delete key | k | ||
delete right | r | ||
restart | s | ||
delete unit | u | ||
delete user | x |
New
Label | Arguments | Options | Comments |
---|---|---|---|
new address | a | cannot be broadcasted | |
new bad access timeout | b | ||
new valid access timeout | c | ||
new key | k | ||
new lock | l | ||
new mode | m | slave/device active or not | |
new rights | r | ||
new status & log rotation | s | ||
new timestamp | t | only if RTC defined (used to synchronize clock) | |
new unit | u | ||
new overdrive speed | v | put 1-wire devices in overdrive speed | |
new wire | w | ||
new user | x | ||
new baudrate | z |
Query
Label | Arguments | Options | Comments |
---|---|---|---|
query general status | a | ||
query bad access timeout | b | ||
query valid access timeout | c | ||
query entry | e | ||
query family | f | 1-wire family | |
query secret key | k | ||
query lock | l | ||
query mode | m | slave/device active or not | |
query rights | r | ||
query status | s | ||
query timestamp | t | only if RTC is defined | |
query unit | u | ||
query overdrive speed | v | ||
query wire | w | ||
query user | x |
operating_systems/linux/debian/acdsn-ac-fx.1352710807.txt.gz · Last modified: 2012/11/12 09:00 by sbolay