operating_systems:linux:debian:acdsn-ac-fx
This is an old revision of the document!
ACDSN-AC-FX
The following line shows how to address and communicate with a NiX1 slave over a RS485 line.
1Qw3 ^^^^ |||| |||- option ||-- argument |--- command ---- address
Commands
Arguments
Delete
Label | Arguments | Options | Comments |
---|---|---|---|
format | a | ||
delete key | k | ||
delete right | r | ||
restart | s | ||
delete unit | u | ||
delete user | x |
New
Label | Arguments | Options | Comments |
---|---|---|---|
new address | a | <address> | 1-65535 - cannot be broadcasted |
new bad access timeout | b | <timeout> | 1-255 |
new valid access timeout | c | <timeout> | 1-255 |
new key | k | <key> | |
new lock | l | <device>\t<lock> | device (1-2) locked (1) or not (0) |
new mode | m | <device>\t<mode> | slave (0) or device (1-9) active (0) or not (0) |
new rights | r | <user>\t<unit>\t<right> | |
new status & log rotation | s | - | |
new timestamp | t | <timestamp> | only if RTC defined (used to synchronize clock) |
new unit | u | <>\t<> | |
new overdrive speed | v | <device>\t<overdrive> | put 1-wire devices in overdrive speed |
new wire | w | - | |
new user | x | <uid> | |
new baudrate | z | <baudrate> |
Query
Label | Arguments | Options | Comments |
---|---|---|---|
query general status | a | ||
query bad access timeout | b | ||
query valid access timeout | c | ||
query entry | e | ||
query family | f | 1-wire family | |
query secret key | k | ||
query lock | l | ||
query mode | m | slave/device active or not | |
query rights | r | ||
query status | s | ||
query timestamp | t | only if RTC is defined | |
query unit | u | ||
query overdrive speed | v | ||
query wire | w | ||
query user | x |
operating_systems/linux/debian/acdsn-ac-fx.1352711333.txt.gz · Last modified: 2012/11/12 09:08 by sbolay